16ft Boesch Design Restoration
Re: 16ft Boesch Design Restoration
Original Hull before 1st resoration in Orange / Red
- Attachments
-
- IMG_0842c.jpg (28.44 KiB) Viewed 6812 times
Re: 16ft Boesch Design Restoration
Only pic i can get so far of the first restoration orformed in the 80's at some stage
- Attachments
-
- IMG_0844c.jpg (28.55 KiB) Viewed 6815 times
Re: 16ft Boesch Design Restoration
"The begining" Removal of the fibreglass off the top deck
- Attachments
-
- IMG_0549c.jpg (39.68 KiB) Viewed 6803 times
Re: 16ft Boesch Design Restoration
"Oh Crap" where did powering off into the sunset go ????????
- Attachments
-
- IMG_0556c.jpg (45.04 KiB) Viewed 6804 times
Re: 16ft Boesch Design Restoration
HAAAAA Haaaaa Damo, classic story so far and very funny comments so keep it rolling My only criticism is that when you piggy-backed the boat home on the car trailer you didn't have it facing backwards (see photo below of my efforts). By facing the boat forwards as you did, you actually made it look sort of normal, kind of like you were on your way to the nearest lake to drop her in and go for a spin. I opted to put mine on backwards and all cocked up on one side so any passersby were under no false illusions that my new aquisition was going anywhere near water at any time in the near future. Even the police who pulled me over at an RBT on the way home felt sorry for me. Cheers mate and welcome. PS. Love the surfy dude wig - if you hadn't noticed, the Victorian mob are pretty big on the hair thing, Jon.
Re: 16ft Boesch Design Restoration
Morning Jon, Well i have to say mine nearly sufferd the same indignity until we worked out that the flat tyres straddled the stiffener bars of the trailer perfectly. As for the surfer head of hair , well I'm afraid I can't lay fame to that as that was the original owner. I have a few more years on him with my hair colour ryming with "Hay" . Heh Heh . Thanks for the welcome mate!
Damian
Damian
Re: 16ft Boesch Design Restoration
"Ok" at this point I had de-constructed the top deck and transom and stood back and gone S#*t what have I got myself into. To make matters worse I had told my beloved wife that the "FIX-UP" wont take long at all and was mainly cosmetic with her telling me its a pile of rotten wood and it will "Never" go again. "Now you can see where I'm at now fellas cant you".The thing with us males is we hate to be proved wrong by our lovely better halves. So the Gauntlet was laid down giving me till next summer to have the old girl completed.
Here are some pics of the transom taking shape, you will see some rib repairs due to the farmers hacking out the ribs for their interpretation of an exhaust system. As well as the centre support I installed another either side for added strength and support. Now this may lift an eyebrow or two, I used 11FC Sikaflex in the construction of the transom and the front and middle supports as I know this product inside out and have been using it for the best part of 10 years in my trade. The old existing joints had failed due to flex in the boat cracking the epoxy, so my thought process was that that by using the 11FC this will remedy this issue by allowing flex. Right or Wrong it's done and as strong as,
Here are some pics
Here are some pics of the transom taking shape, you will see some rib repairs due to the farmers hacking out the ribs for their interpretation of an exhaust system. As well as the centre support I installed another either side for added strength and support. Now this may lift an eyebrow or two, I used 11FC Sikaflex in the construction of the transom and the front and middle supports as I know this product inside out and have been using it for the best part of 10 years in my trade. The old existing joints had failed due to flex in the boat cracking the epoxy, so my thought process was that that by using the 11FC this will remedy this issue by allowing flex. Right or Wrong it's done and as strong as,
Here are some pics
- Attachments
-
- IMG_0621c.jpg (28.75 KiB) Viewed 6722 times
-
- IMG_0609c.jpg (31.43 KiB) Viewed 6719 times
-
- IMG_0607c.jpg (36.92 KiB) Viewed 6717 times
-
- IMG_0606c.jpg (38.39 KiB) Viewed 6711 times
Re: 16ft Boesch Design Restoration
Hey Nool, noy trying to distract from the main topic, but did you pick up on the maroon machinery on the left in the pics?
Greg
Greg
Re: 16ft Boesch Design Restoration
VIP badge there Greg?
Re: 16ft Boesch Design Restoration
Reckon so Andy
Return to “Restoration Help and Advice”
Who is online
Users browsing this forum: No registered users and 52 guests