Anybody have a prop they want to off-load?
Right hand rotation, 11.5 X 11 or 11.5 X 12 with a one inch shaft.
Contact Glen on 0418 131 185
Prop required
Re: Prop required
Hi Glen,
With a pitch of 11 or 12 , this prop belongs to a couta boat ?
Doc.
With a pitch of 11 or 12 , this prop belongs to a couta boat ?
Doc.
Re: Prop required
Thanks Doc
I believe it's a 14' 6" running a Holden 202. The engine won't rev past 3300 on the current prop. Any suggestions?
Greg
I believe it's a 14' 6" running a Holden 202. The engine won't rev past 3300 on the current prop. Any suggestions?
Greg
-
- Posts: 159
- Joined: 03 Jun 2009, 17:00
Re: Prop required
This site may give a better idea of best prop
http://www.australpropeller.com.au/selection.htm
http://www.australpropeller.com.au/selection.htm
Re: Prop required
11/5 in x 15 pitch in a 2 blade
10/5 in x 14 pitch in a 3 blade
3300rpm limit you are loading up , cut back in diameter you will increase revs which will increase mph.
Doc.
10/5 in x 14 pitch in a 3 blade
3300rpm limit you are loading up , cut back in diameter you will increase revs which will increase mph.
Doc.
Re: Prop required
Thanks all
Problem resolved
Greg
Problem resolved
Greg
Who is online
Users browsing this forum: No registered users and 94 guests