Nirvana 1941 Chris Craft
Nirvana 1941 Chris Craft
Today I took Nirvana out of storage and brought her home to my workshop via the weighbridge. I was surprised that boat and trailer went 960 kgs. Pulled the loose stuff from the hull and second surprise was the size of the fuel tank... 80 litres for that tiny 4 cylinder Hercules engine.
- Attachments
-
- 20201110_113254.jpg (4.09 MiB) Viewed 194900 times
-
- 20201110_165816.jpg (3.26 MiB) Viewed 194900 times
-
- 20201110_165948.jpg (4.89 MiB) Viewed 194900 times
-
- 20201110_103043.jpg (3.7 MiB) Viewed 194900 times
Re: Nirvana 1941 Chris Craft
Side valve technology and low compression ratio Bob. I can't imagine it would have been all that fuel efficient. Are you going to keep it stock? It's a great boat.
Re: Nirvana 1941 Chris Craft
Yes, I'd like to keep it as original as possible. Fortunately all of the original hardware came with the boat.
Re: Nirvana 1941 Chris Craft
900kg beast! "Mahogany Mammoth"
Re: Nirvana 1941 Chris Craft
I poked around yesterday and discovered that the prop is 11 x 9, swinging on a 1" SS shaft mind you! Owners in the US are wrapt when they get 23 mph, four up with a full tank (80 litres!) of fuel.
Re: Nirvana 1941 Chris Craft
Somewhat more sedate than you are accustomed to Bob. But you are getting older!
Re: Nirvana 1941 Chris Craft
Here's an update covering the past week or so. Pretty much everything that can be removed from inside the hull is out and stored away after bagging and tagging. Skin fittings and bright work removed too. Thanks to Craig's good tip, I'm getting the sound deadening behind the rear seat checked for asbestos. Engine came out today.... heavy little sucker! Broken engine mount would explain wear in the log. Removing the deck is next and will be fun as it seems to be glued with epoxy to the frame and screwed.
- Attachments
-
- 20201120_091227.jpg (3.15 MiB) Viewed 194784 times
-
- 20201120_091250.jpg (3.34 MiB) Viewed 194784 times
-
- 20201120_104551.jpg (3.5 MiB) Viewed 194784 times
-
- 20201120_091241.jpg (3.05 MiB) Viewed 194784 times
Re: Nirvana 1941 Chris Craft
Looks oil free in the bilge and really clean Bob. Novel drive belt behind the flywheel for generator.
Re: Nirvana 1941 Chris Craft
A previous owner in the US put a new bottom on and it has an epoxy flow coat. The boat has never been in the water with the new bottom. The drive belt behind the flywheel is interesting. I was wondering if that can be changed without removng the flywheel.
Re: Nirvana 1941 Chris Craft
How's the 1941 dog clutch?
- Attachments
-
- 20201120_104656.jpg (3.12 MiB) Viewed 194771 times
Who is online
Users browsing this forum: No registered users and 86 guests