Classic Australian Wooden Power Boat Association

Hi folks. I'm after a reasonably priced used heat exchanger to cool a 350 Chev. I really don't want to spend more than $500.

Have one that should be OK where are you?

Hi. Thank you for your response. I'm in Berwick - Melbourne. Do you have a picture of your heat exchanger please? Regards, Gary 0437 514 145

some one else has it at the moment I'll get him to get a pic

ok. Thank you..

Have sent you a PM

Hi Alan. I haven't received anything yet. Our email is hastieg@gmail.com and mobile number is 0437 514 145. I forgot to ask where you are? We're in Sydney this week. Regards, Gary

Apologies Alan. Just found the PM. I looked up the model number and unfortunately its an oil cooler. I'm after a fresh water/raw water cooler/ heat exchanger....unless it can be used for both purposes. I'd welcome any feedback please as I'm very interested. Thank you for your efforts so far. Regards, Gary

Hi Gary, yes it can be used for both, it would be an over kill for engine oil. The ends can be changed and would normally be large to match the hose size (Radiator) but in a boat we often use smaller hose. This style end is usually fitted with the end holes one up one down so that the liquid does three passes. Call me on 0403 838 193 if you want.