Page 1 of 1

Early Holley 94 parts

Posted: 23 Aug 2016, 11:45
by RightyO
I have a set of triple Carbys I am rebuilding for Nightmare but I have discovered that the two outer Carly's do not have accularator pumps fitted ,I need the pump parts .Does anyone have any old Carbys I could use for parts . Perhaps you might know where I might be able to get parts for them .
Has anyone had experience with these triple setups I intend to run progressive linkage and was thinking that they may only need the pump on the centre carby .
Year I know the smart thing to do would be to forget about it but I like a challange
Ken .

Re: Early Holley 94 parts

Posted: 24 Aug 2016, 20:57
by JamesW
Mike Davidson "Flat attack" is SA has rebuild kits for Holley 94's and may have the parts you require. http://www.flatattackracing.com/

Exactly what parts do you need? http://www.vanpeltsales.com/FH_web/FH_i ... 38to48.jpg

Yes you should stick with the triple 2bbl's!

Re: Early Holley 94 parts

Posted: 24 Aug 2016, 21:02
by JamesW
I'm running 2x2bbls and need both accelerator pumps. They are not the Holley/ford but a generic replacement, I had to machine pump rods and fit modern pump buckets as the leather ones had perished!

Re: Early Holley 94 parts

Posted: 25 Aug 2016, 12:06
by RightyO
Thanks for that James ,I have full gaskets sets and have had a bit of luck with finding carby's for parts .I spotted a set of triples on gumtree for a y block and it turns out he has parts and 2 complete spare carby's .
Ken