Hi all,
I need a piece of Marine Ply about 40cm square. I need to replace the top piece on Grumpy's Cav plate and don't really want to pay $200 for a whole sheet when I only need such a little piece.
Regards
Nick
Marine ply in Melbourne or environs
Re: Marine ply in Melbourne or environs
what sort of thickness do you need, i've got some bits and pieces here. Ray
Re: Marine ply in Melbourne or environs
Same here Nick, what colour?
Re: Marine ply in Melbourne or environs
Thanks guys,
I got out the verniers and the old ply was 7.6 mm thick so anything around that thickness. Wood coloured ply? Not sure if colour matters as it might end up varnished, red-stained or painted?
Regards
Nick
I got out the verniers and the old ply was 7.6 mm thick so anything around that thickness. Wood coloured ply? Not sure if colour matters as it might end up varnished, red-stained or painted?
Regards
Nick
Re: Marine ply in Melbourne or environs
Nick, have some 8mm (5/16") offcuts you can hack a piece off if you want, give me a call if you want some.
Alan.
Alan.
Who is online
Users browsing this forum: No registered users and 51 guests