Ric, so you just need one 2 inch outlet? I'll have a look tonight.
Dave
thru transom exhaust pipe
Re: thru transom exhaust pipe
Hello Dave .
A pair would be great but a single will do.
With the pair they (hopefully)would be identical but an odd single may not match my other.
May hear from you soon .
Ta Ric...
A pair would be great but a single will do.
With the pair they (hopefully)would be identical but an odd single may not match my other.
May hear from you soon .
Ta Ric...
Re: thru transom exhaust pipe
Ric, I have only one 2 inch flapper exhaust outlet and it has HOLDEN cast into the flap so probably best on somebodies Holden 6 cylinder boat, unless you happen to have the matching one already on your boat?!
Dave
Dave
Re: thru transom exhaust pipe
No Dave ,keep that one ,it sounds a bit special.
Mine is just a standard Seacraft one ,no markings.
But I am using a twin outlet manifold to get better flow
and want to continue that system to the transom.
Any other hoarders out there whom may be able to help ?
Ric...
Mine is just a standard Seacraft one ,no markings.
But I am using a twin outlet manifold to get better flow
and want to continue that system to the transom.
Any other hoarders out there whom may be able to help ?
Ric...
Re: thru transom exhaust pipe
Hey Ric, I dont know if your interested but I was in the same boat ( sorry ) and mad my own out of S/Steel fuel fillers . I know its a bit strange but they look great and a hell of alot cheaper than buying repos, I left the little tag on mine but will be removing it before it goes on the boat. Pics below , If your interested give me a call and I will give you the rundown,
Damo
Damo
- Attachments
-
- IMG_0674c.jpg (28.47 KiB) Viewed 7322 times
-
- IMG_0661c.jpg (22.52 KiB) Viewed 7322 times
-
- IMG_0981c.jpg (22.22 KiB) Viewed 7319 times
-
- IMG_0979c.jpg (24.89 KiB) Viewed 7320 times
Re: thru transom exhaust pipe
Damo, they look great.
Where do you get them and how much are they?
I am not sure weather I will use the idea but it will give me options.
I am trying to get onto an old Sea craft guru to find out if he has one,
other than that will come back to your idea.
Thanks Ric....
Where do you get them and how much are they?
I am not sure weather I will use the idea but it will give me options.
I am trying to get onto an old Sea craft guru to find out if he has one,
other than that will come back to your idea.
Thanks Ric....
Re: thru transom exhaust pipe
Hey Ric - give these guys a go. http://www.briggsmarine.com.au/Briggs_M ... aust_pipes You will need to scroll down to the bottom of the page. I got a pair from them ages ago - a bit expensive if I remember correctly, but first rate quality.
Bob
Bob
Re: thru transom exhaust pipe
Evening Ric, I got them in Perth from a company called JPW Marine 08 6253 3000 ( P/No JPW19090 ) and they cost me $180 for the two which compared to an expensive rough sand cast aluminium counterpart seemed very cheap to me as I love anything in S/Steel. As you can see by the pics I simply cut off the latch and polished up the area leaving a perfect through transom exhaust complete with a decent mounting flange. Ric I dont know how well you are set up in your workshop but this would only take me around an hour to complete in my workshop and if you need a hand to keep costs down because these bloody wooden things seem to keep costing money I dont mind lending a hand at all, (0417 865 419 ) hope this is of some help , Cheers!!
Damo!!
Damo!!
Re: thru transom exhaust pipe
Damo,
Thanks for your most generous offer, it is much appreciated.
I have been onto the site Bob suggested and it appears that I can source
one the same as or very close to the original for $80 ,so I think I will go on that path.
I actually have 3 of the same fuel caps , only polished alluminum alloy
I got in the States for $25 each. But not tuff enuff for exhaust outlets.
Thanks again.. Ric...
Thanks for your most generous offer, it is much appreciated.
I have been onto the site Bob suggested and it appears that I can source
one the same as or very close to the original for $80 ,so I think I will go on that path.
I actually have 3 of the same fuel caps , only polished alluminum alloy
I got in the States for $25 each. But not tuff enuff for exhaust outlets.
Thanks again.. Ric...
Who is online
Users browsing this forum: No registered users and 28 guests