Page 1 of 1

Goodlear clinker

Posted: 29 Jan 2014, 07:36
by Greg
Again, club members get first look.

A late 50's Goodlear runabout is being offered for sale. In the owner's words:

The boat and all the associated bits, including the engine (Corvette, 1964-1967 casting number of 3892657), vintage Edelbrock C28 inlet manifold and 2 X Carter 4 barrels(obviously need a rebuild) and the 2 x genuine air cleaners, 2 blade menkins prop - and all the other bits. The previous owner tells us that the engine was originally bought from Bill Warner in Sydney many many years ago when the boat was built/repowered. Engine is dry sumped.

There are four split planks, two on the bottom and two higher. There is also a split in the transom. No rot could be found in the boat.

Call Scott at Temora. Mobile number is 0431940295.

Probably looking at $7 - $10,000 range


More photos are available. Let me know and I will forward them to you.

Greg

(This ad will be transferred to the public area of the Board after approx one week)

2013_0524goodlear0001.JPG
2013_0524goodlear0001.JPG (91.01 KiB) Viewed 2508 times


2013_0524goodlear0002.JPG
2013_0524goodlear0002.JPG (78.5 KiB) Viewed 2508 times


2013_0524goodlear0006.JPG
2013_0524goodlear0006.JPG (62.79 KiB) Viewed 2505 times


2013_0524goodlear0007.JPG
2013_0524goodlear0007.JPG (61.69 KiB) Viewed 2503 times

Re: Goodlear clinker

Posted: 01 Feb 2014, 17:40
by DaveD
Be interesting to know the engine numbers for that block and the head casting numbers.
According to my book of Chevy casting numbers that block could be a 1966 - 67, 327, 350 or even 302!
Dave