holden six/ ford altenator
holden six/ ford altenator
Hi guys, was wondering what alternators people are running on there holden red 6's. I'm trying to use a ford one at the moment because it has an inbuilt reg and when fitted is pretty tight to the side of the motor. Does it make any difference that it runs backwards ? I was told it wouldn't. Only problem is it's not producing any power. Had an electical genius working on it today with no result, (tried a second one with same result) Hope someone can help. cheers.
Re: holden six/ ford altenator
Ray,
should work anyway, I assume they work on the bench? what was on there before, or is all the wiring new?
Alan
should work anyway, I assume they work on the bench? what was on there before, or is all the wiring new?
Alan
Re: holden six/ ford altenator
Hi Brian, the wiring is all new, as far as i know the alternator is ok. It's had new brushes fitted and the slip rings seem ok, we have tried two regulators and checked the wiring system and all seems ok. The ignition light was an LED but we swaped that for an incadecant globe but nothing we've done has made any difference. It's got me stuffed.!!
Re: holden six/ ford altenator
Ray,
I remember the last one I fitted to a six with a V belt drive from the prop drive hub on the timing case. The pulley on the engine was the same size as the alt, and the only way I got it to work was to run the engine well over 2500rpm to get it excited (and the neighbors). The norm ratio is 3:1 so the light will go out at idle.
Alan.
I remember the last one I fitted to a six with a V belt drive from the prop drive hub on the timing case. The pulley on the engine was the same size as the alt, and the only way I got it to work was to run the engine well over 2500rpm to get it excited (and the neighbors). The norm ratio is 3:1 so the light will go out at idle.
Alan.
Re: holden six/ ford altenator
Sorry Alan, called you Brian, brain fade.....maybe the ford alernator doesn't like being mated to a holden hadn't thaught of that.
Re: holden six/ ford altenator
both pulleys are about the same size and i have reved the crap out of it with a multi meter on it and it's definately not charging. will try and post a pic of the setup. cheers.
Re: holden six/ ford altenator
i know the problem, its right in front of you ray. u painted it yellow when it should be red
looks good though
looks good though
Re: holden six/ ford altenator
Hi Brian, yeah was waiting for that one. Didn't you know holden made a yellow motor (or a least they should have). Boat is going in the water this weekend for the first time. Dont have the deck on yet but need to know if the balance is right before i do all the fancy stuff, if it sits in the water and doesn't do anything stupid the lid goes on. Just hope it doesnt sink!!!! What alternator are you running on your red motor? Will let you guys know how the shakedown trials go. Cheers mate.
Re: holden six/ ford altenator
hey ray, ive got a good mate who paints alll his holden engines yellow because thes ones he painted red turned out to be lemons, go figure that one out. haha
on mine i just run the standard red 161 alternator. i havnt touched it apart from taking it off the old engine and putting it on the new one that you have seen.
i tested mine in the same way you are about to, no deck, sitting on a milk crate. it felt like it was flying but it was fun.
ive had more enjoyment out of my bond wood with the 6 then any other boat ive owned n im sure you will find the same. get some more pics up and give a us a gander at the progress.
brian
on mine i just run the standard red 161 alternator. i havnt touched it apart from taking it off the old engine and putting it on the new one that you have seen.
i tested mine in the same way you are about to, no deck, sitting on a milk crate. it felt like it was flying but it was fun.
ive had more enjoyment out of my bond wood with the 6 then any other boat ive owned n im sure you will find the same. get some more pics up and give a us a gander at the progress.
brian
Return to “Restoration Help and Advice”
Who is online
Users browsing this forum: No registered users and 113 guests