Nirvana 1941 Chris Craft
Re: Nirvana 1941 Chris Craft
First coat of primer on today. Did a light sand with a scotchbrite pad, then applied with a foam roller and it went on well. Should dry okay overnight so 2nd prime coat goes on tomorrow. Very glad to see the end of the patched and epoxied boards.
- Attachments
-
- 20210827_132441.jpg (2.92 MiB) Viewed 5894 times
-
- 20210827_141337.jpg (2.73 MiB) Viewed 5894 times
Re: Nirvana 1941 Chris Craft
How many coats will go on total Bob?
Re: Nirvana 1941 Chris Craft
Kind of liked the patched and epoxied planks, Bob, but looking really great with colour.
What is the top coat an off white? Ray was hoping maybe a really yellow/white
What is the top coat an off white? Ray was hoping maybe a really yellow/white
Re: Nirvana 1941 Chris Craft
I sanded all the paint off (applied by very poorly a previous restorer) back to bare timber. Then applied 2 coats of Everdure - a 2 pack epoxy sealer - light buff with a Scotchbrite pad then the first coat of grey primer today. To follow tomorrow is a second coat of grey primer, then 2 coats of white undercoat. The recomendation is for the second undercoat to be 50:50 undercoat with the final coat. Top coat is to be a fire engine red, 3 coats to be applied. Then the bootstripe is white... three coats also I expect.
Re: Nirvana 1941 Chris Craft
That's plenty of coats Bob. It won't leak.
Have you eyed the fire engine red paint yet? Most paints I've used with that name are very very bright.
Have you eyed the fire engine red paint yet? Most paints I've used with that name are very very bright.
Re: Nirvana 1941 Chris Craft
Fire engine red? You betcha. The brighter the better, offset by the sparkling white bootline. Planning on painting the trailer the same fire engine red as the bottom of the hull too. There is some question as to what my hull was originally... the build sheet that matches the hull number says red but the sales brochure for my model/year says copper so I'm going with red.
Re: Nirvana 1941 Chris Craft
It will go faster if it's red Bob, loving your work. I'm afraid i have neither the skill nor the patience to produce that kind of quality. My philosopher of choice is Mediocrates
Re: Nirvana 1941 Chris Craft
Red enough?
- Attachments
-
- 20210828_162229.jpg (2.29 MiB) Viewed 5828 times
Re: Nirvana 1941 Chris Craft
First coat of undercoat applied this morning. It's white but looks grey. The spec sheet says to wait 30 hours before sanding, so no painting activity tomorrow. The spec sheet also says that undercoat #2 can be mixed 50:50 undercoat with top coat.
- Attachments
-
- 20210902_101343.jpg (3.09 MiB) Viewed 5688 times
-
- 20210902_111252.jpg (3.04 MiB) Viewed 5688 times
Who is online
Users browsing this forum: No registered users and 159 guests