Page 35 of 39
Re: Thunda Babe
Posted: 03 Aug 2023, 17:29
by rayza1
Must be a bit of red cordial happening out you way Craig, great work guys
Re: Thunda Babe
Posted: 07 Aug 2023, 18:49
by WoodRay
Cracking along now.
- 364545471_227176170291144_2714286274635722269_n.jpg (193.99 KiB) Viewed 17527 times
Re: Thunda Babe
Posted: 10 Aug 2023, 17:50
by WoodRay
Re: Thunda Babe
Posted: 11 Aug 2023, 11:42
by Bob Vic
If its any help Craig, I had a similar problem with my Chris Craft in places. The solution is to get a bag of toothpicks from the $2 shop. Push some epoxy down & into the nail hole, shove in as many toothpicks as will fit and let it set. The yanks call it... toothpicking!
Re: Thunda Babe
Posted: 11 Aug 2023, 23:01
by WoodRay
I've been drilling and using dowels. Seems to have worked fine. It's the cracks in the transom where big nails have been belted in that has me thinking a lot.
Re: Thunda Babe
Posted: 21 Aug 2023, 13:49
by WoodRay
Going to enjoy this bit.
- DSC_0426.JPG (8.68 MiB) Viewed 17430 times
Re: Thunda Babe
Posted: 21 Aug 2023, 19:23
by Bob Vic
That will be satisfying. Careful with that power saw... they bite.
Re: Thunda Babe
Posted: 21 Aug 2023, 21:31
by Alan
You going to make a wine barrel or two ?
Re: Thunda Babe
Posted: 22 Aug 2023, 16:56
by WoodRay
Yes Bob, I will be! I've seen your war wound and I don't want one.
No Alan, it'll all be fuel for the shed heater. Ashes to ashes, dust to dust...............................
Re: Thunda Babe
Posted: 22 Aug 2023, 16:59
by WoodRay
Well I think that's the last of the repairs done. Transom will live another day now and top planks finished. Only 4 planks to go.
- 367856907_1041744893855126_5562997420976362205_n.jpg (131.45 KiB) Viewed 17403 times
- 367830791_659845709424448_2662070524280613733_n.jpg (130.41 KiB) Viewed 17403 times