Thunda Babe
Re: Thunda Babe
Yep, that's just one reason why I don't like them.Alan wrote:Not going to help get to 44mph
-
- Posts: 173
- Joined: 24 Dec 2013, 18:47
Re: Thunda Babe
If you go with this type of system full time , do the Math on how long pipes should be at the RPM you are happy to run at.
Re: Thunda Babe
Wildwoody1 wrote:If you go with this type of system full time , do the Math on how long pipes should be at the RPM you are happy to run at.
I wont be. It's only temporary as I need to get some run time up this summer in case further development is needed for the new rockers.
-
- Posts: 173
- Joined: 24 Dec 2013, 18:47
Re: Thunda Babe
I didn't know Ian Harvey ran this Hydro with a crossflow. I'm on the money with length by the looks of it. Thanks for posting.
-
- Posts: 173
- Joined: 24 Dec 2013, 18:47
Re: Thunda Babe
Another angle of the Harvey crossflow in Snoopy.
- Attachments
-
- ZZZXXX Scan_20210826-3_InPixio 2.jpg (317.81 KiB) Viewed 4614 times
Re: Thunda Babe
Thats a great photo. I'm struggling to look past the Waggott in front. Thanks for posting.
Re: Thunda Babe
Great Pics! Holden grey special heads, and how prominent is that grain on the deck
Re: Thunda Babe
Strip and clean everything again. Muck around with some paint too. Assemble and test piston to valve clearance tomorrow.
Who is online
Users browsing this forum: No registered users and 146 guests