Thunda Babe

Postby **Alan** » 18 Aug 2021, 20:45

Not going to help get to 44mph

Postby **WoodRay** » 18 Aug 2021, 21:09

Alan wrote:Not going to help get to 44mph

Yep, that's just one reason why I don't like them.

Wildwoody1 · Postby **Wildwoody1** » 19 Aug 2021, 10:13

If you go with this type of system full time , do the Math on how long pipes should be at the RPM you are happy to run at.

Postby **WoodRay** » 19 Aug 2021, 10:19

Wildwoody1 wrote:If you go with this type of system full time , do the Math on how long pipes should be at the RPM you are happy to run at.

I wont be. It's only temporary as I need to get some run time up this summer in case further development is needed for the new rockers.

Wildwoody1 · Postby **Wildwoody1** » 22 Aug 2021, 17:59

Harvey Repco

Postby **WoodRay** » 25 Aug 2021, 07:24

I didn't know Ian Harvey ran this Hydro with a crossflow. I'm on the money with length by the looks of it. Thanks for posting.

Wildwoody1 · Postby **Wildwoody1** » 26 Aug 2021, 10:00

Another angle of the Harvey crossflow in Snoopy.

Postby **WoodRay** » 27 Aug 2021, 08:42

Thats a great photo. I'm struggling to look past the Waggott in front. Thanks for posting.

Postby **Darren** » 27 Aug 2021, 20:16

Great Pics! Holden grey special heads, and how prominent is that grain on the deck

Postby **WoodRay** » 01 Sep 2021, 22:56

Strip and clean everything again. Muck around with some paint too. Assemble and test piston to valve clearance tomorrow.

: 241130911_271229851231262_1270005261911577650_n.jpg (64.77 KiB) Viewed 4440 times

: 241153289_170002511913390_2613822863091430257_n.jpg (42.65 KiB) Viewed 4440 times

Classic Australian Wooden Power Boat Association