I just added a couple of 100 cu in class skiff pics to the Oz Boat racers BB. I've attached here FYI. It seems that Fox-E may have re-surfaced in Ballarat with a green coat of paint... I tracked down Mick Bakoff a few years ago regarding Dyn-A-Mite and if I recall correctly the boat wound up at his mothers place and then disappeared, probably to the tip. These photos are from 1979, Fox-e at Albert Park lake and Dyn-A-Mite at the kilos at Eppalock.
Bob
Where Are They.
Where Are They.
- Attachments
-
- Fox-e_resize.JPG (96.02 KiB) Viewed 9088 times
-
- Dynamite 3_resize.JPG (88.31 KiB) Viewed 9087 times
-
- Dynamite 2_resize.JPG (91.16 KiB) Viewed 9089 times
-
- Dynamite 1_resize.JPG (92.05 KiB) Viewed 9085 times
Re: Where Are They.
Great pics Bob. Used to enjoy those classes years ago. We raced in 75 and 95. Was 100 a Victorian size or did it migrate to 100 after 95? What engines were in Fox-E and Dyn-A-Mite?
Bob (maybe I should start saying Bob W)
Bob (maybe I should start saying Bob W)
Re: Where Are They.
I definitely remember the 75 cu in and 95 cu in classes too. (I think there may have once been a 50 cu in class too.) The 100 cu in class evolved from 95 cu in. I think the 100 cu in class evolved when the 1600 cc engines appeared as that is a tad over 97 cu in. The Ford Lotus twin cam engine was the really hot, reasonably difficult to get, hard to tune and expensive engine of the day. All the quick 95 cu in boats had these twin cam engines.... Then the Fiat arrived on the scene. I don't know very much about these except they were like the Ford - a 4 cylinder & twin cam head. I have no idea what was in Fox-e but from the photos it looks like Dyn-A-Mite has the Fiat.
Bob
Bob
Re: Where Are They.
An old post and I cant add much but an observation - did these boats run the drive from the flywheel end? because if they did Fox E is a Fiat and the other a Ford because for some reason Fiat had the exhaust on the right hand side ( looking from the flywheel end ) and all the ford twin cams right up to the BDA (maybe beyond) had the Carbs on the right side. If the engines were run in either location then my observation is out the window!!
These must have been great little race boats
These must have been great little race boats
Re: Where Are They.
Interesting observation Will - I can't speak about the boats above, however, in those days there wa s a small Z drive gearbox built by Ron Leaney which was common with these smaller engines. I had one in my little skiff which had a 1600 cc cross flow Ford. The drive was taken off the flywheel end, through the Z drive gearbox and then out the prop shaft. Just looked at the photos and with this set up the exhaust was on the port side of the boat. Hope this helps.
Re: Where Are They.
Bob - yes it looks like anything was possible ( and so it should be!) If you look at Old Flame (readers boats) it has a 1600 Kent cross flow with engine reversed and I guess a V drive of some sort with the exhaust out the starboard side.
Re the Z drive they used in the day - was it a specially designed box or an adaption of an auto box of some kind? maybe a modified small transfer case or similar.
Just being inquisitive
Re the Z drive they used in the day - was it a specially designed box or an adaption of an auto box of some kind? maybe a modified small transfer case or similar.
Just being inquisitive
Re: Where Are They.
I think Old Flame drives off the nose of ther timing case Will. Here is a photo of the gerarbox that I used both in my little skiff and the hydro. It was a purpose designed Z drive, very compact, sturdy and durable. No idea of how much horsepower it could handle.
Bob
Bob
- Attachments
-
- robca hydro3.jpg (43.51 KiB) Viewed 8241 times
Re: Where Are They.
Thanks for the info Bob that set up is just sweet. I guess there must have been a reasonable market for these small boxes at the time. Its hard to imagine anybody setting up to make patterns and cast gearboxes like this today.
Does the Z drive even have a water jacket? or are those oil lube lines to a heat exchanger ? or engine oil / heat exchanger?
Does the Z drive even have a water jacket? or are those oil lube lines to a heat exchanger ? or engine oil / heat exchanger?
- bootlegger
- Posts: 1472
- Joined: 09 Mar 2009, 20:18
Re: Where Are They.
Ive got Niad here. Cortina powered
Re: Where Are They.
Hey Dave, will Niad ever be restored? It's a nice looking thing.
Who is online
Users browsing this forum: No registered users and 144 guests