Greg,
you can pass on my number if you want, I have a few recommendations that may help.
Alan
Search found 868 matches
- 14 Jun 2010, 20:51
- Forum: Restoration Help and Advice
- Topic: Engine help
- Replies: 5
- Views: 5380
- 10 Jun 2010, 09:23
- Forum: Restoration Help and Advice
- Topic: any one have triple su's
- Replies: 18
- Views: 15899
Re: any one have triple su's
Jeff,
If both are identical or you just changed from one to the other, then the friction would be the largest difference so theoretically rollers would make a larger power output. The only problem is measuring such a small amount.
Alan
If both are identical or you just changed from one to the other, then the friction would be the largest difference so theoretically rollers would make a larger power output. The only problem is measuring such a small amount.
Alan
- 08 Jun 2010, 23:29
- Forum: Restoration Help and Advice
- Topic: any one have triple su's
- Replies: 18
- Views: 15899
Re: any one have triple su's
Guys, apart from the obvious (old age) the only time I have seen rollers fail repeatedly on the same engine was because the geometry was not checked. Once the correct geometry was set (push rod length) no more problems. There is a simple gauge available (http://www.jegs.com/i/Proform/778/66790/10002...
- 07 Jun 2010, 20:48
- Forum: Get Togethers and Events
- Topic: Melbourne Boat Show
- Replies: 12
- Views: 9861
Re: Melbourne Boat Show
Guys,
if anyone in Melb needs help getting their boat into the show, give me a yell.
Alan.
if anyone in Melb needs help getting their boat into the show, give me a yell.
Alan.
- 07 Jun 2010, 20:44
- Forum: Restoration Help and Advice
- Topic: any one have triple su's
- Replies: 18
- Views: 15899
Re: any one have triple su's
Jeff, The two main reasons that rollers should be used is for their ultimate strength at sustained high RPM and the ability to handle higher valve lifts than stamped OE rockers. The problem in measuring the power gain is, you can't use big cams for big power with standard rockers, and as the frictio...
- 05 Jun 2010, 22:37
- Forum: Restoration Help and Advice
- Topic: Paint for clinker hull
- Replies: 30
- Views: 22095
Re: Paint for clinker hull
Cam, I used both the filler and the topcoat, I can't remember what the appearance was after the filler but I used the brush method and then sanded lightly (as it doesn't fill much). The topcoat was the one that surprised me the most, it went on so well I couldn't believe it. It was the first time I ...
- 01 Jun 2010, 00:38
- Forum: Main Room
- Topic: Inboard motor safety considerations
- Replies: 9
- Views: 7623
Re: Inboard motor safety considerations
Joe, An electronic dist is not a safety item, it may however help the engine perform better and will stay in tune longer. The best form of defense against as petrol explosion is as some have suggested, prevention and then detection which you already have. Regular inspection,double clamps and well su...
- 29 May 2010, 15:46
- Forum: Get Togethers and Events
- Topic: Water Sports Centre Get Together
- Replies: 47
- Views: 31535
Re: Water Sports Centre Get Together
Brian,
Greg had a camera but don't know if anything would have come out with the shivering.
Alan.
Greg had a camera but don't know if anything would have come out with the shivering.
Alan.
- 28 May 2010, 22:01
- Forum: Get Togethers and Events
- Topic: Water Sports Centre Get Together
- Replies: 47
- Views: 31535
Re: Water Sports Centre Get Together
Yeah Greg, today was really cool, hopefully next time if it's warmer it might be even cooler.
Great to see all that came and get rid of some cobwebs.
Alan
Great to see all that came and get rid of some cobwebs.
Alan
Re: Intro
Welcome Joe,
hope you find the information that you need, there is a huge amount of experience available amongst the members.
Alan.
hope you find the information that you need, there is a huge amount of experience available amongst the members.
Alan.